September 2, 2026
In warehouses, factories, workshops, docks, distribution centers, and industrial storage areas, operators often need a simple way to move palletized goods and raise them to shelf, bench, machine, or loading height. Forklifts may be too large for narrow areas, electric stackers may be more complex than the task requires, and manual pallet trucks cannot lift loads high enough for stacking. This is where a dependable manual hydraulic stacker becomes a practical daily tool.
For buyers, the challenge is not only choosing a rated capacity. A stacker must provide stable lifting, safe lowering, controlled movement, strong fork support, and long-term durability under repeated handling. If the mast flexes, the forks shake, the hydraulic cylinder leaks, or the wheels are difficult to control, everyday pallet movement can become slow and unsafe.
The SINOLIFT SYC Manual Hydraulic Stacker is designed for efficient material handling and elevated stacking in demanding industrial environments. With robust steel construction, one-piece fixed forks, a high-performance sealed hydraulic lifting system, reinforced drive chains, a C-section steel frame, safety foot brake, and ergonomic handle, it delivers a strong balance of lifting power, stability, and easy manual operation.
Material handling work is often full of short-distance tasks: unloading pallets, moving goods from receiving to storage, feeding materials to production, positioning components near workstations, and stacking goods to improve space utilization. A manual hydraulic stacker gives operators a flexible solution when a full-size forklift is unnecessary or impractical.
The SYC series is especially useful for facilities that need lifting height as well as movement. With maximum fork heights from 1000mm to 3000mm, the stacker can help place goods onto racks, trucks, platforms, or elevated storage positions. At the same time, the manual hydraulic system avoids battery charging, complex electrical maintenance, and dependence on fixed lifting equipment.
Its fixed fork design also supports safer load handling. One-piece fixed forks reduce load movement during lifting, while the reinforced frame and dual-chain structure help the mast maintain stability. For operators handling palletized goods every day, that stability is central to confidence, speed, and long service life.
High-strength steel and a 6-8mm thick frame provide excellent rigidity, load capacity, and durability for repeated lifting, stacking, and industrial handling.
A large-bore sealed hydraulic cylinder delivers smooth, powerful lifting with reliable sealing performance and reduced risk of oil leakage.
The molded fixed fork structure provides strong pallet support, reduces shaking during lifting, and improves reliability during stacking operations.
The SYC series supports load capacities from 500kg to 1500kg and lifting heights up to 3 meters for transportation and elevated stacking tasks.
The upgraded thickened handle improves comfort, while the extended handle requires only 150N pulling force for easier manual movement.
A safety foot brake, directional nylon front wheels, wear-resistant castors, and reinforced dual-chain drive support controlled handling in daily work areas.
The SYC Manual Hydraulic Stacker helps operators combine transport and stacking in one compact machine. Instead of moving a pallet with a pallet truck and then using a separate lift to raise it, operators can pick up the load, travel a short distance, and lift it to the required height. This is useful for storage organization, production feeding, loading support, and workshop positioning.
Model selection should begin with the load and target height. SYC0510 and SYC0516 support 500kg loads with maximum fork heights of 1000mm and 1600mm. SYC1018, SYC1025, and SYC1030 support 1000kg loads with maximum fork heights of 1800mm, 2500mm, and 3000mm. SYC1516 and SYC1525 support 1500kg loads with maximum fork heights of 1600mm and 2500mm.
The 1150mm fork length and 560mm total fork width suit many common pallet handling tasks, while the 90mm minimum fork height allows practical entry under compatible pallets. Turning radius values of 1540mm or 1590mm help buyers understand aisle requirements before purchase. For facilities with narrow aisles, crowded workstations, or mixed pallet sizes, these dimensions should be checked against the actual layout.
Because the stacker is manually operated, it is easy to deploy across different departments without charging infrastructure. Warehouses can use it for receiving and storage, factories can use it for raw materials and finished goods, workshops can use it for tools and equipment, and docks can use it for loading, unloading, and short-distance transfer. Routine checks of wheels, brake, chain tension, hydraulic response, and fork condition help keep daily operation stable.
The SYC series includes 500kg, 1000kg, and 1500kg models, allowing buyers to match the stacker to light-duty, medium-duty, and heavier industrial handling tasks.
The maximum fork height ranges from 1000mm to 3000mm depending on the model. The SYC1030 reaches up to 3000mm for higher stacking requirements.
Yes. The one-piece fixed fork design provides stable load support and helps reduce shaking or movement of goods during lifting and stacking.
Yes. The SYC is designed for pallet transportation, shelf loading, elevated stacking, storage organization, and short-distance material movement in warehouses and distribution centers.
The stacker uses a sealed large-bore hydraulic cylinder with strong sealing performance, smooth lifting action, and reduced risk of oil leakage during long-term use.
A safety foot brake helps prevent unwanted movement during parking, unloading, loading, or positioning operations.
| Parameter | Unit | SYC0510 | SYC0516 | SYC1018 | SYC1025 | SYC1030 | SYC1516 | SYC1525 |
|---|---|---|---|---|---|---|---|---|
| Load Capacity | kg | 500 | 500 | 1000 | 1000 | 1000 | 1500 | 1500 |
| Centre of Gravity | mm | 600 | 600 | 600 | 600 | 600 | 600 | 600 |
| Maximum Fork Height | mm | 1000 | 1600 | 1800 | 2500 | 3000 | 1600 | 2500 |
| Minimum Fork Height | mm | 90 | 90 | 90 | 90 | 90 | 90 | 90 |
| Fork Length | mm | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 | 1150 |
| Fork Width | mm | 100 x 48 | 100 x 48 | 160 x 55 | 160 x 55 | 160 x 55 | 160 x 55 | 160 x 55 |
| Mast Width | mm | 430 | 430 | 480 | 600 | 600 | 490 | 600 |
| Total Fork Width | mm | 560 | 560 | 560 | 560 | 560 | 560 | 560 |
| Minimum Turning Radius | mm | 1540 | 1540 | 1590 | 1590 | 1590 | 1590 | 1590 |
| Steering Wheels | mm | 150 x 50 | 150 x 50 | 150 x 50 | 150 x 50 | 150 x 50 | 150 x 50 | 150 x 50 |
| Front Wheels | mm | 80 x 36 | 80 x 36 | 80 x 60 | 80 x 60 | 80 x 60 | 80 x 60 | 80 x 60 |
| Overall Length | mm | 1655 | 1655 | 1660 | 1680 | 1670 | 1670 | 1690 |
| Overall Width | mm | 640 | 640 | 790 | 780 | 780 | 700 | 870 |
| Overall Height | mm | 1380 | 1970 | 2210 | 1760 | 2020 | 2085 | 1760 |
| Net Weight | kg | 126 | 140 | 182 | 259 | 278 | 182 | 288 |
Moves palletized goods, organizes storage areas, and supports daily loading and unloading tasks.
Transports raw materials, components, and finished products between production and storage areas.
Provides convenient lifting and positioning for equipment, tools, parts, and heavy materials.
Supports efficient cargo handling, loading, unloading, and short-distance transportation.
Raises goods up to 3 meters to improve shelf use and optimize warehouse space.
Combines pallet transport, lifting, positioning, and stacking for repeated industrial workflows.
Reliable manual stacking focus - the SYC is designed for practical pallet movement, lifting, and stacking in warehouses and industrial sites.
Multiple capacity and height options - seven models cover 500kg, 1000kg, and 1500kg capacities with fork heights up to 3000mm.
Stable fixed-fork structure - one-piece fixed forks, reinforced C-section steel, and dual-chain drive help keep loads stable during lifting.
Low-maintenance hydraulic operation - sealed hydraulics, powder coating, wear-resistant castors, and reinforced components support long service life.
Factory-direct support - SINOLIFT provides model selection, technical guidance, replacement parts, and after-sales support for global buyers.
Need a manual hydraulic stacker for warehouses, factories, workshops, docks, logistics operations, or industrial stacking applications? Contact SINOLIFT for SYC specifications, pricing, and model selection support.
Contact SINOLIFTWebsite: www.drumhandlingequipments.com
Email: china@sinolift.com
WhatsApp: +86 135 2454 6619
Related search terms
