August 14, 2026
SINOLIFT has introduced the ELGA-DC Semi-Electric Aluminum Material Lift Series, a portable lifting solution engineered for safely raising, positioning, and installing materials at elevated working heights. Combining a 24V DC electric lifting system with manual maneuverability, the new ELGA range is designed to reduce physical effort while preserving the compactness, mobility, and flexibility required on construction sites, in warehouses, during HVAC installation, and across a broad range of industrial maintenance projects.
Material installation work often creates a difficult balance between lifting capacity and transportability. Heavy lifting equipment may provide the required capacity but can be difficult to move through standard doorways, confined interiors, or multi-site projects. Fully manual lifting devices are easier to transport, yet repetitive raising and positioning of heavy components can increase operator fatigue and reduce productivity. The ELGA-DC Series is designed to address both challenges with a semi-electric configuration that uses electric power where operators need it most while retaining simple manual movement between working positions.
At the center of the ELGA design is a reliable 24V DC electric winch that raises materials smoothly and consistently. The operator manually positions the lift, deploys the stabilizing outriggers, places the load on the platform, and uses the powered lifting system to move materials vertically. This arrangement allows one person to complete many routine lifting and positioning tasks with substantially less physical effort than a traditional manual material lift, while avoiding the bulk and complexity associated with larger powered equipment.
The series consists of four models — ELGA10-DC, ELGA15-DC, ELGA20-DC, and ELGA25-DC — with maximum lifting heights of 3.5, 5.0, 6.0, and 7.0 meters respectively. Rated capacities range from 350 kg on the ELGA10-DC to 200 kg on the highest-reaching ELGA25-DC. This model range gives contractors, maintenance teams, warehouses, installers, and industrial users the flexibility to select the height and capacity combination that best matches their actual application rather than relying on a single oversized machine.
Despite its lifting capability, the ELGA retains a folded height of only 2,035 mm across all four models. The telescopic aluminum mast can be reduced into a compact transport configuration, helping the machine pass through standard doorways and simplifying loading into vans or small trucks. For businesses operating across multiple job sites, this compactness can directly reduce setup time and make it easier to move the same lifting equipment between projects.
A dependable DC electric winch provides smooth vertical lifting with minimal operator effort. The powered system is particularly valuable for repetitive installation and positioning tasks where manual cranking can slow down work and increase fatigue.
The aluminum alloy mast combines structural rigidity with low overall weight. Its corrosion-resistant construction supports stable lifting performance while making the equipment easier to transport, position, and store.
The ELGA Series covers maximum lifting heights from 3.5 to 7.0 meters, allowing customers to choose a model suited to warehouse shelving, HVAC installation, electrical work, construction, or higher-level industrial servicing.
All models fold to a height of 2,035 mm. This compact transport profile allows the machine to move through many standard doorways, fit more easily into service vehicles, and occupy less storage space between jobs.
Heavy-duty adjustable outriggers create a wide and stable support footprint during lifting. They can be deployed quickly at the work area to improve stability when handling materials at elevated heights.
The combination of lightweight construction, manual mobility, powered lifting, and simple setup enables a single trained operator to transport, position, and raise many common materials efficiently.
A practical loading platform provides space for HVAC units, ducting, electrical components, machinery parts, construction materials, and other industrial items that need to be positioned at working height.
Large transport wheels, swivel casters with brakes, reinforced chassis components, and industrial-grade lifting parts are designed for repeated movement and daily use across workshops, warehouses, commercial interiors, and construction environments.
The ELGA-DC Series is intended not simply to lift materials higher, but to make the complete handling process more efficient. Its electric lifting speed is rated at 49 mm/s under load, with a 59 mm/s lowering speed and a no-load lifting speed of 58 mm/s. These controlled movement speeds help operators position materials more predictably when aligning equipment with brackets, shelves, ceiling structures, service openings, or installation points.
For HVAC contractors, the machine can assist with raising air-conditioning units, ducting, and related components into installation position. For electrical contractors, it can support the lifting of equipment and materials for overhead work. In warehouses and factories, it can help move components to elevated storage or assembly positions without requiring a large forklift or powered access machine for every task. Its compact dimensions also make it particularly relevant in finished buildings where floor space and access routes are restricted.
The semi-electric design also offers a practical ownership advantage. Because propulsion remains manual, the system is mechanically straightforward while the electric winch reduces the most demanding part of the job: repeated vertical lifting. This balance can be especially attractive for users who need powered assistance but do not require a fully self-propelled machine. Routine operation remains simple, and the compact platform can be stored with less space than many conventional lifting systems.
The ELGA-DC Series is designed for a wide range of professional lifting and installation tasks where portability, height, and controlled material positioning are equally important.
Raise air-conditioning units, ducting, ventilation components, and related equipment to installation height with reduced manual effort.
Support the positioning of glass panels, interior fittings, and construction components in commercial buildings and restricted indoor work areas.
Lift components, stock, and industrial materials to elevated storage, shelving, workbench, or processing positions.
Position machinery parts, electrical equipment, pipes, and technical components during plant installation or equipment upgrades.
Assist facility teams with controlled lifting for repair, replacement, overhead servicing, and planned maintenance activities.
Provide a portable lifting solution for materials that must be moved between levels or positioned accurately in confined work zones.
ELGA-DC Semi-Electric Aluminum Material Lift Series — four models for 3.5 to 7.0 m lifting applications
| Specification | ELGA10-DC | ELGA15-DC | ELGA20-DC | ELGA25-DC |
|---|---|---|---|---|
| Maximum Lift Height | 3.5 m | 5.0 m | 6.0 m | 7.0 m |
| Load Capacity | 350 kg | 300 kg | 250 kg | 200 kg |
| Loading Platform / Fork Size | 700 × 500 mm | 700 × 500 mm | 700 × 500 mm | 700 × 500 mm |
| Folded Height | 2035 mm | 2035 mm | 2035 mm | 2035 mm |
| Power Supply | 24V DC Electric Winch | 24V DC Electric Winch | 24V DC Electric Winch | 24V DC Electric Winch |
| Motor Power | 1.3 HP (450 W) | 1.3 HP (450 W) | 1.3 HP (450 W) | 1.3 HP (450 W) |
| Lifting Speed | 49 mm/s | 49 mm/s | 49 mm/s | 49 mm/s |
| Lowering Speed | 59 mm/s | 59 mm/s | 59 mm/s | 59 mm/s |
| No-load Lifting Speed | 58 mm/s | 58 mm/s | 58 mm/s | 58 mm/s |
The ELGA-DC Series is designed around a simple idea: make elevated material positioning easier without making the equipment harder to transport. By combining an aluminum mast, compact folding structure, stable outriggers, and DC electric lifting, the series gives professional users a practical tool for installation and material handling across a broad range of job sites.
— SINOLIFT Product Team
Model selection within the ELGA range is straightforward. The ELGA10-DC provides the highest rated capacity of the series at 350 kg and a maximum lifting height of 3.5 meters, making it well suited to heavier materials at moderate elevations. The ELGA15-DC extends reach to 5.0 meters while maintaining a 300 kg rated capacity, offering a balanced configuration for many commercial and industrial installations.
For higher-level work, the ELGA20-DC reaches 6.0 meters with a 250 kg capacity, while the ELGA25-DC provides the maximum 7.0-meter lifting height with a 200 kg rated capacity. Across all four models, the same 700 × 500 mm loading platform, 24V DC electric winch, 450 W motor, and compact 2,035 mm folded height provide a consistent operating concept. This common design approach simplifies training for companies that use more than one ELGA model across different sites.
The choice between models can therefore be based primarily on required lifting height and load weight. Users handling heavier components at lower levels can prioritize capacity, while installers working at greater heights can select the longer mast configurations. This modular approach helps businesses purchase equipment that is closely matched to real operational needs.
The introduction of the ELGA-DC Semi-Electric Aluminum Material Lift Series broadens SINOLIFT's portfolio of practical material handling and lifting solutions for professional users. As industrial facilities, warehouses, commercial buildings, and construction projects increasingly demand equipment that can work efficiently in tighter spaces, portable lifting systems are becoming an important complement to forklifts, stackers, and larger access equipment.
By focusing on a lightweight aluminum structure, powered vertical lifting, stable outrigger support, compact transport dimensions, and simple one-person operation, the ELGA Series is positioned for customers who need dependable lifting assistance without unnecessary complexity. The four-model lineup provides useful flexibility from 3.5 to 7.0 meters, helping users match the machine to specific installation heights, load requirements, and site conditions.
SINOLIFT will continue developing material handling equipment around practical workplace needs, with an emphasis on efficient operation, durable construction, straightforward maintenance, and configurations that can adapt to different industrial environments. The ELGA-DC Series reflects that approach by turning a demanding lifting task into a more controlled, repeatable, and transportable process.
Learn more about SINOLIFT and explore our complete range of material handling and lifting equipment:
www.drumhandlingequipments.com
